Hestan KSO30 Installation Manual download pdf (Page 6)

STEPS FOR INSTALLATION

The following pages provide the necessary information for proper installation of the oven and

are arranged as follows:

• Technical data (Electrical ratings and maximum connected load).

• Oven Door Removal - optional

• Installation cutout dimensions, required clearances and mounting instructions for:

- Wall or under-counter installation, single oven

- Wall installation, double oven

- Flush installation

• Electrical supply and wiring requirements, electrical connections for 3-wire or 4-wire branch

circuit. Programming required if connecting to 208 volt circuit.

• Final checklist.

TECHNICAL DATA

OVEN DOOR REMOVAL

To reduce weight during installation or to fit through a very narrow door opening, the oven

door(s) can be removed. Remove only if necessary.

Make sure oven is cool and power to the oven has been turned off before removing the door.

Failure to do so could result in electrical shock or burns.

• The oven door is heavy and fragile. Use both hands to remove the oven door. The door

front is glass. Handle carefully to avoid breakage.

• Grasp only the sides of the oven door. Do not grasp the handle as it may swing in your hand

and cause damage or injury.

• Failure to grasp the oven door firmly and properly could result in personal injury or product

damage.

LOCATION AND INSTALLATION

(continued)

Oven Model

Electrical Ratings and Maximum Connected Load

@ 120/240 Volts 60 Hz @ 120/208 Volts 60 Hz

SINGLE OVEN Amperes kW Amperes kW

16.9 3.84 17.5 3.54

DOUBLE OVEN

Amperes kW Amperes kW

UPPER CAVITY LOWER CAVITY

33.8 7.68 32.4 6.48

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Hestan KSO30 Installation Manual Page 6