Hestan KFCR30OV Use and Care Manual download pdf (Page 17)

An integrated control system provides information through light signals or

text messages visualized on the display.

The information signal is always visualized with a xed text message, while

a malfunction signal is visualized with blinking text. The sound signal that

accompanies some malfunction signals can be deactivated by pressing

the Alarm button

on the main control panel.

The list of malfunction signals is located at the back of this manual.

Each model has been carefully tested before leaving the factory and is adjusted in such a

way to ensure high performance and low consumption. Usually, it is not necessary to modify

the settings. Nevertheless, according to special needs, it is possible to modify the set

Nevertheless, according to special needs, it is possible to modify the set temperatures as

follows:

Refrigeration

Compartment

Freezer

Compartment

(Fresh Zone)

From +1°C to +7°C (from 34°F to 46°F), the recommended preset

temperature is +4°C (39°F).

To adjust the temperature use the Up/Down buttons . Upon touching

these buttons the newly set temperature will appear in the display. To

modify this temperature, use the buttons until reaching the desired tem-

perature.

From -13°C to -23°C (from 9°F to -11°F), the recommended temperature

is preset at -18° (-1°F).

To adjust the temperature use the Up/Down buttons

. Upon touching

these buttons the newly set temperature will appear in the display. To

modify this temperature, use the buttons until reaching the desired

temperature.

In case the compartment is used as refrigerator or Fresh Zone compartment

(Fresh Zone function) the recommended and preset temperatures will

correspond to those indicated for the respective compartments.

The temperature shown can vary slightly in

respect to the set temperature following frequent

openings of the doors or insertion of room

temperature foods or large quantities of foods.

6 to 12 hours are necessary to reach the selected

temperature.

The Ice Maker button located on the main control panel permits

activation of the automatic icemaker.

The button is illuminated when the icemaker is functioning.

A prewash of the water circuit should be performed before activating

the Ice Maker for the rst time. To do this touch at the same time

buttons Enter and Ice Maker

After a few minutes the Ice Maker can be activated.

For freezer models

Do not activate the Ice Maker until the

water line is properly connected.

ADJUSTING THE VARIOUS TEMPERATURE SETTINGS

ACTIVATING THE ICE MAKER

DISPLAY INFORMATION AND MALFUNCTION MESSAGES

(continued)

GETTING TO KNOW YOUR REFRIGERATOR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Comments to this Manuals

No comments

Hestan KFCR30OV Use and Care Manual Page 17

Comments to this Manuals

Related products and manuals for Wine coolers Hestan KFCR30OV